Norcold 2117 Owner's Manual

Also see for 2117: Installation manual Parts list Owner's manual

Norcold 2117 Owner's Manual Manual pdf 6 page image

Owner’s Manual 6Door handles:During travel, the door latch prevents the door from opening. When closingeach door, push the door toward the refrigerator until you hear a “click” sound.To open each door, pull the handle away from the refrigerator (See Art0812).movable door seal:The movable door seal [134] is located on the left door of the fresh foodcompartment (See Art0813). It provides the correct seal when both doors ofthe fresh food compartment are closed. When the left door of the fresh foodcompartment opens, the movable door seal moves so that it is flat against theedge of the door. To avoid possible damage to the movable door seal, makesure that it is flat against the edge of the door before you close the doorCrispers and beverage bin:The crispers are located at the bottom of the fresh food compartment and supply a storagearea to preserve fruit and vegetable freshness. Make sure that you always push the crispersfully in. The crisper covers open as the crispers open and close as the crispers close.Each crisper also has an adjustable vent that is used to adjust the humidity inside eachcrisper. Move each vent toward the right (high humidity) for most vegetables or toward the left(low humidity) for most fruits (See Art01834).The crispers, crisper covers, beverage bin, and beverage bin cover are removable for clean-ing.NOTE: Do not wash the crispers, crisper covers, beverage bin, or beverage bin cover in adishwasher. These parts are not dishwasher safe.To remove the crisper covers (See Art01824):- With the crisper closed, lift the crisper cover[135] to the fully raised position.- Locate the hinge pins[71] that are part of the crisper cover rails [197].- Push the front of one of the crisper cover rails inward toward the crisper soyou can lift that side of the crisper cover off of the hinge pin.- Slide the opposite side of the crisper cover off of the other hinge pin.- To reinstall the crisper covers, do this procedure in the opposite order.70Art01812134Art01813Art01834Art0182413519771