112. Lift the door off the bottom hinge.3. Remove the panel retainer by prying the retainerout of the slot (See Art01985).4. Gently pull the door panel out of the door.5. Push a new door panel into the door slot.6. Put the panel retainer in the original location andpress the retainer back into the slot.7. Put the door in the original location and tightenthe two (2) bolts.Reverse the door swing:1. Remove the door from the refrigerator byremoving the two (2) bolts that attach the doorhinge to the bottom of the refrigerator (SeeArt01986).2. Remove the two (2) bolts that attach the upperhinge.3. Remove the bolt that attaches the door latch plate tothe top of the refrigerator (See Art01987).4. Remove the upper hinge and the door latch platefrom the refrigerator.5. Attach the upper hinge and the door latch plate to theopposite sides of the refrigerator.6. Move the latch to the opposite side of the door (SeeArt01988):- Remove the screw that attaches the latch handleand the latch pin.- Remove the latch handle pin and the coil springfrom the door.- Move the set screw to opposite side of the latchpin.- Assemble the coil spring and the latch pin into theopposite side of the door.Art01986BoltsBoltsDoor hingeDoor hingeDoor latch plateBoltsArt01987Art01988ScrewLatch handleLatch pinCoil springSet screwDoor