Norcold DC0788B Installation And Owner's Manual

Contents

12- Attach the handle to the latch pin.- Make sure that the angled end of the latch pin is up.7. Put the door onto the refrigerator and make sure that the gasket seals correctly.8. Install and tighten the two (2) screws that attach the door hinge to the bottom of therefrigerator.Connect the 120/220/240 volts AC supplyConnect the AC power cord(s) only to a grounded three-prongreceptacle. Do not remove the round ground prong from anyof the AC power cords. Do not use a two prong adapter or anextension cord with any of the AC power cords. Operation ofthe refrigerator without correct ground can cause dangerouselectrical shock or death if you are touching the metal parts ofthe refrigerator.Put the AC power cord into a grounded three-prong receptacle.Connect the 12/24 volts DC supplyOnly connect the refrigerator directly to the battery. Becausethey often generate high voltage pulses and cause transistordefects in the inverter, no other switches, lead wires, orelectrical equipment should share the wiring between therefrigerator and battery.Art01521Refrigerator RefrigeratorRefrigeratorRefrigeratorINCORRECT INCORRECTCORRECT CORRECTBattery charger orAC/DC converter etc.Battery charger orAC/DC converter etc.TransistorizedDC power supplyTransistorizedDC power supplyWARNING!CAUTION!