Norcold N61X Service Manual
Also see for N61 Series: Owner's manualOwner's manualInstallation manual
                                                                             | |
Contents
| 
www.norcold.com/cda44 Refrigerator Service ManualN6XX/N8XX Models1. Check the condition of the combustion seal.Replace seal if damaged. Do not install therefrigerator if the combustion seal is damaged.2. Place the refrigerator in the enclosure. Thecombustion seal must seat fully against theenclosure wall.3. Attach the bottom of the cabinet to the enclosure.See Figure 31.4. Reinstall the bottom trim piece. See Figure 31.5. Secure the top of the cabinet with two screws andinstall hole plugs. See Figure 32.6. Secure the back of the cabinet to the enclosurefloor with two screws.N64XIM/N84XIM (ice maker)a. Connect the water supply line to the ice makerwater valve.b. Open the water supply to the ice maker.7. Connect the RV LP gas supply line to the gasvalve inlet fitting.8. Open the solenoid gas valve manual shut-off.9. Plug the refrigerator AC power cord to the RVreceptacle.10. Connect the RV DC power supply wires to powerboard terminals 12VDC and 12V_GND1.11. Open the LP gas tank valve(s), then leak test LPgas connection at solenoid gas valve.12. Leak test the burner solenoid gas valve and orificeassembly burner tube connections.WARNINGDo not install the refrigerator if the combustion sealhas been damaged. A damaged combustion seal mustbe replaced. The seal isolates the living area of thevehicle from exhaust gases generated by LP gascombustion. LP gas exhaust gases contain carbonmonoxide, which is an odorless, colorless gas thatcan cause dizziness, nausea, or in extremeconcentrations, deathReinstallation of Refrigerator into EnclosureFigure 31. Bottom trim and retaining screws.Figure 32. Top retaining screws and hole plugs.Cabinet retaining screwsTrim retaining screwsBottom trim pieceHole plugsCabinet retaining screws |
Related manuals for Norcold N61 Series
manualsdatabase
Your AI-powered manual search engine