© 2006 Nordic ID oyRF651 User Manual Version 1 June 200612���������������3. Using the RF6513.1 First Time ActivationAfter inserting batteries (2 x AA 1,5 V alkaline or NiMH batteries – note that alkaline batteries may not be charged)to the Hand Terminal for the first time, the device starts to search the Bluetooth network. The hand terminal must beconfigured to Bluetooth network from the internal menu by pressing the +<0> The following Settings screen willbe displayed:• Device list Access Servers defined as a part of the system.• Search Activate the search for nearby Bluetooth devices,• PIN Code 4-digit PIN code setting• Wait Connection Waits for a Bluetooth connection from another device.• RF-settings Bluetooth channel, resending times, reception timelimit and “what” behaviour -settings.The RF651 needs to be set up for the Bluetooth connection with the USB adapter or the Access Server.Use the up/down -keys to highlight a specific item from the list and press key to select it.3.2 Connecting to the Access ServerThis section describes how to create the Bluetooth connection with the Access Server. It is assumed that all configurationsand settings are already made in the Access Server and the Host Application side (for further information see AccessServer related documentation).The WRAP Access Server support up to 7 or 21 connections simultaneously. The RF651 can be connected to oneAccess Server at time, but with the roaming capability the hand terminal use area can be expanded just adding anotherAccess Server to the LAN.Fig. Operation diagram of the RF651 and WRAP serversFig. Settings menu of the RF651
