Nordic Start NS-1054 User Manual
           | |
P. 8 User Guide2. The parking lights will flash once and the LED will flash slowly to confirm that the doorshave been locked and that the Starter Kill feature is enabled (if it was installed).To UNLOCK your doors and DISARM the Starter Kill:1. Press and hold the UNLOCK button for approximately 1 sec.2. The parking lights will flash twice and the LED will go out to confirm that the doors havebeen unlocked and that the Starter Kill feature is disarmed if it was installed.Note: If installed and configured in Passive Mode at installation, the Starter Kill feature willrearm automatically 60 seconds after the doors are unlocked. For that reason, you mayhave to unlock your doors a second time if some time elapses before you actually startthe engine.Priority Door AccessIf the remote door locks option is installed on your vehicle, this safety feature allows you tounlock solely the driver’s door with a single press of the UNLOCK button on the transmitter;upon a second press of the UNLOCK button, all the other doors will unlock.Ignition-controlled Door Locks OptionThis is an added security feature. If your system was installed with the Ignition-controlledDoor Locks option, the doors will automatically be locked as soon as the user presses thebrakes while the ignition key is in the IGNITION ON (RUN) position.When the key is turned to the Ignition OFF position, the doors will automatically be unlocked.(Only available if remote Door Lock Option is installed)Secure Lock OptionBefore it can remote start your vehicle, the module must first disarm the factory securitysystem.The Secure Lock feature may be required on certain vehicle models with factory securitysystems that automatically unlock the doors when the security system is disarmed.To keep your vehicle protected when the factory security system is disarmed for a remotestart, Secure Lock will relock your doors as soon as the vehicle has started.Once the engine run cycle ends, Secure Lock will rearm your factory security system.Remote Trunk Release OptionIf your system was installed with the Remote Trunk Release, you can open your trunk bypressing the TRUNK button on the remote transmitter. Vehicles must have an electric TRUNKswitch or a remote TRUNK button on the vehicle’s OEM Transmitter for this option to becompatible with the Module.Starter Kill / Anti-GrindThis added security feature will immobilize your vehicle when the system is armed ( LOCKED ).If your Module was installed with the Starter Kill option, you will not be able to start yourvehicle with the key unless the system has been disarmed first ( UNLOCKED ).The Starter Kill option can be programmed to be ACTIVE (will not arm automatically) or PASSIVE(will arm automatically). In PASSIVE Mode, your installer can program it to arm automatically in1 or 3 minutes.Once the vehicle has been remote started, the Anti-Grind feature prevents the starter motorfrom re-engaging when the ignition key is accidentally turned to the CRANK position.Note: Automobile insurance companies sometimes offer a rebate for vehicles with apassive starter kill device. |
Related manuals for Nordic Start NS-1054
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine