NordicTrack GRT 360 User Manual

Contents

51. Press a 1 1/2” x 2 1/2” Outer Cap (5) onto each endof the Right Base (7). Attach the Rear Base (8) tothe Right Base with two 3/8” x 3 1/2” Bolts (6) andtwo 3/8” Nylon Locknuts (11). Do not tighten theNylon Locknuts yet.Attach two Lower Support Plates (13) to the RightBase (7) with two 3/8” x 3 1/2” Bolts (6) and two3/8” Nylon Locknuts (11). Do not tighten theNylon Locknuts yet. Note: Do not confuse theLower Support Plates with the Upper SupportPlates (not shown); when the Lower SupportPlates are attached to the Right Base, the edgeswith three holes will slant backward slightly.• Assembly requires two people.• Place all parts in a cleared area and remove thepacking materials. Do not dispose of the packingmaterials until assembly is completed.• Tighten all parts as you assemble them, unlessinstructed to do otherwise.• As you assemble the weight rack, make sure allparts are oriented as shown in the drawings.The following tools (not included) are requiredfor assembly:• Two adjustable wrenches• One rubber mallet• Lubricant, such as grease or petroleum jelly,and soapy water.Assembly will be more convenient if you have asocket set, a set of open-end or closed-endwrenches, or a set of ratchet wrenches.AssemblyMake Things EasierEverything in this manual is designed to ensurethat the weight rack can be assembledsuccessfully by anyone. However, the weightrack has many parts, and the assemblyprocess will take time. Setting aside plenty oftime will make the process go more smoothly.2. Press a 1 1/2” x 2 1/2” Outer Cap (5) onto each endof the Left Base (2). Attach the Rear Base (8) to theLeft Base with two 3/8” x 3 1/2” Bolts (6) and two3/8” Nylon Locknuts (11). Do not tighten theNylon Locknuts yet.Attach two Lower Support Plates (13) to the LeftBase (2) with two 3/8” x 3 1/2” Bolts (6) and two3/8” Nylon Locknuts (11). Do not tighten theNylon Locknuts yet.861113These edgesshould slantbackwardslightly.136 751151826131361155112