NordicTrack NTS79020 User Manual

Contents

1015. Wrap the High Cable (63) over a 3 1/2” Pulley(56). Attach the Pulley to the indicated bracket onthe Top Frame (5) with an M10 x 46mm ButtonHead Bolt (76) and an M10 Nylon Locknut (101).16. Wrap the High Cable (63) under a 3 1/2” Pulley(56). Attach the Pulley and a Cable Trap (105)between the second set of holes from the top ofthe pair of Long Pulley Plates (59) with an M10 x46mm Button Head Bolt (76) and an M10 NylonLocknut (101). Make sure the Cable Trap isturned to hold the Cable in the groove of thePulley.17. Wrap the High Cable (63) over a 3 1/2” Pulley(56). Attach the Pulley to the indicated bracket onthe Top Frame (5) with an M10 x 46mm ButtonHead Bolt (76) and an M10 Nylon Locknut (101).14. Wrap the High Cable (63) over a 3 1/2” Pulley(56). Attach the Pulley to the indicated bracket onthe Top Frame (5) with an M10 x 46mm ButtonHead Bolt (76) and an M10 Nylon Locknut (101).1457610163 561551617101595663105 76563765610176101635618. Attach an end of the High Cable (63) to the other“U”-bracket (62) with an M6 Nylon Locknut (103).Thread the Locknut onto the end of the Cableso that two threads show past the Locknut(see the inset drawing).186210363 6362103