Nordica MODULO ALL INCLUSIVE Instructions For Installation, Use And Maintenance Manual

Nordica MODULO ALL INCLUSIVE Instructions For Installation, Use And Maintenance Manual Manual pdf 11 page image

MODULO ALL INCLUSIVE7095520 - IT-EN-DE-FR 111. GENERAL PRECAUTIONSLa NORDICA S.p.A. responsibility is limited to the supply of the appliance. The installation must be carried out scrupulously according to theinstructions provided in this manual and the rules of the profession. Installation must only be carried out by a qualified technician who workson behalf of companies suitable to assume the entire responsibility of the system as a whole.This appliance is not suitable for the use of inexperienced people (included children) or with physical, sensorial and mental reducedcapacities. They have to be controlled and educated in the use of the appliance from a responsible person for their security. The childrenhave to be controlled to be sure that they would not play with the appliance. (EN60335-2-102/7.12).La NORDICA S.p.A. declines any responsibility for the product that has been modified without written authorisation as well as forthe use of non-original spare parts.DO NOT MODIFY THE APPLIANCE.NORDICA S.p.A. cannot be held responsible for lack of respect for such precautions.2. TECHNICAL DESCRIPTIONHydraulic module for La NORDICA thermoproducts: - All Inclusive UNIVERSAL module; - ITALYTERMO D.S.A. All Inclusive module.The module is equipped with:• safety devices,• a closed expansion vessel,• pumps,• domestic hot water production system.Management and operation are controlled by a digital electronic regulator which always installed on-board the machine, and a separately-installed second display screen connected to the main and unstable one is available ONLY for the UNIVERSAL module3. INSTALLATIONInstallation of the product and auxiliary equipment in relation to the heating system must comply with all current Standards and Regulationsand to those envisioned by the law.Installation relating to the connections of the system, commissioning and the check of the correct functioning must be carried out incompliance with the regulations in force by authorised professional personnel with the requisites required by the law, being national,regional, provincial or town council present in the country within which the appliance is installed, besides these present instructions.Installation must be carried out by authorised personnel who must provide the buyer with a system declaration of conformity certificate andwill assume full responsibility for final installation and as a consequence the correct functioning of the installed product.All operations must be performed with mains power disconnected.WARNING : installation, connections and testing must be performed by qualified personnel acting in compliance with the standards inforce and as described in the heating appliance instruction booklet Correct operation of the appliance is only guaranteed for pumps andvalves approved by La Nordica. La Nordica is not liable for any improper use of the appliance.NB. All piping must be insulated in accordance with applicable standards (in Italy law 10/91).IMPORTANT: temperature safety sensors must be in place on the machine or at a distance no greater than 30 cm from the flow connectionof the thermo-product. Whenever the thermo products lack a device, those missing can be installed on the thermo product flow pipe,within a distance no greater than 1m from the thermo product.NOTE: the standard UNIVERSAL module is equipped with a 3-bar SRV valve and a 95°C TRV with double thermal safety to be installed inthe hydraulic system in compliance with all current Standards and Regulations and pursuant to the Law.Before installation, accurately wash the pipes of the system in order to remove any residuals that could compromise the correct functioningof the appliance.IMPORTANT:a) In case of water leaking, close the water supply and promptly warn the after sales technical service;b) The system working pressure must periodically be checked.c) If not using the boiler for a long period of time, it is recommended that the after sales technical service is contacted to carry out atleast the following operations:• close the water taps of both the thermal system and the domestic hot water system;• empty the thermal system and the domestic hot water system if there is risk of freezing.4. WATER CONNECTIONIMPORTANT: after having transported / handled the All Inclusive Module, check tightness of all the compression nuts on the copper pipes.Take special care when connecting the Module to the plumbing system to avoid bending the copper pipes in the KIT. To counter thetightening force exerted on the plumbing system connection pipe, use a wrench or other tool on the terminal in the KIT being connected.WARNING: after having connected the Module to the plumbing system, check tightness of all the compression nuts on the copper pipes.The two All Inclusive Modules are already equipped with a VSP valve (Thermal Relief Valve) and a SRV valve (Safety Relief Valves), aswell as being pre-arranged to be installed in open vessel system.The VST valve (Thermal Relief Valve) is supplied disassembled with the UNIVERSAL Module, while it is already installed in the All InclusiveModule for ITALYTERMO DSA.IMPORTANT: for open vessel or closed vessel installation refer to the instructions manual of the thermoproduct combined with the AllInclusive Module.