EN - 113.2 Display and Control PanelCo8 6 5 4 2Economy modeindicatorThermostat set level indicatorSet button Button LEDSuper Cool modeindicator3.3 Operating your Fridge Freezer3.3.1 Cooler Temperature Settings• Initial temperature value for cooler settingindicator is 6 oC.• Press set button once, the set value willstart to blink.• If you keep pressing set button, lowertemperatures will be selected. (8, 6, 5, 4,2, super and eco)• If no button is pressed for 1 second, yourchoice will be set, it will blink 3 times.Buzzer will sound.• The temperature value selected beforesuper cool mode or economy mode isactivated will remain the same whenthe mode is over or cancelled. Theappliance continues to operate with thistemperature value.3.3.2 Super Cool ModeWhen Would It Be Used?• To cooling huge quantities of food.• To cooling fast food.• To cooling food quickly.• To store seasonal food for a long time.How Would It Be Used?Press set button until super cool symbol willbe seen on the screen. Buzzer will sound.Mode will be set.During This Mode:• Economy mode can not be selected.• Super cool mode can be cancelled bypressing set button again until the supercool symbol disappears.3.3.3 Economy ModeHow Would It Be Used?Press set button until eco symbol will beseen on the screen. Buzzer will sound.Mode will be set.During This Mode:• Super cool can be selected. Economymode is automatically cancelled and theselected mode is activated.• Eco mode can be cancelled by pressingset button again until the economysymbol disappears.3.3.4 Door Open Alarm FunctionIf cooler or freezer door is opened morethan 2 minutes, appliance sounds ‘beepbeep’.3.4 Temperature Adjustment Warnings• It is not recommended that you operateyour fridge in environments colder than10°C in terms of its efficiency.• Do not start another adjustment while youare already making an adjustment.• Temperature adjustments should bemade according to the frequency of dooropenings, the quantity of food kept insidethe fridge and the ambient temperature inthe location of your fridge.• In order to allow your fridge to reachthe operating temperature after beingconnected to mains, do not open thedoors frequently or place large quantitiesof food in the fridge. Please note that,depending on the ambient temperature,it may take 24 hours for your fridge toreach the operating temperature.• A 5 minute delay function is appliedto prevent damage to the compressorof your fridge when connecting ordisconnecting to mains, or when anenergy breakdown occurs. Your fridgewill begin to operate normally after 5minutes.