Nordmende RUI110NMWHA+ Instruction Booklet

Contents

Nordmende RUI110NMWHA+ Instruction Booklet Manual pdf 7 page image

EN - 5 -Before Switching On• Wait after 3 hours before plugging the appliance in to the main powerto ensure proper performance.• There can be an odour when you first switch on the appliance. It willdisappear after the appliance starts to cool.Installation and Switching On The Appliance• This appliance is connecting to 220-240V or 200-230V and 50 Hz. Please checknameplate of appliance and be sure voltage range suitable to your mains voltage.• You can offer help from the service to install and switching on the appliance.• Before making the connection to the power supply,ensure that the voltage on thename plate corresponds to the voltage of electrical system in your home.• If the socket does not match the refrigerator plug, replace the plug with a suitable one(at least 16 A)• Insert the plug into a socket with an efficient ground connection.If the socket has no ground contact or the plug does not match,we suggest you to call an authorised electrician for assistance.• The plug should be accessible after the appliance is positioned.• Manufacturer is not responsible for failure to complete theground connection as described in this booklet.• Do not place the appliance in direct sunlight.• Do not use in open air and shall not be exposed to the rain.• To prevent the condenser (which is at the back, the blackcomponent with fins) from touching the wall, fit the plasticdistance guide and rotate it 90° to lock in place.• Place the refrigerator far from heat sources and in a well-ventilated position. The refrigerator should be at least 50 cmfrom radiators, gas or coal stoves and 5 cm far from electricalstoves.• Keep the top free for at least 15 cm.• Fit the plastic wall spacers to the condenser at the back of therefrigerator in order to prevent leaning to the wall for goodperformance.• Do not place heavy and lots of things on the appliance.• If the appliance is installed next to another refrigerator or freezer, observe a minimumdistance of 2 cm to prevent condensation.• The appliance must be stand firmly and level on the floor Use the two front levelling-feet to compensate for an even floor.• The outside of the appliance and the accessories inside should be cleaned with asolution of water and liquid soap; the inside of the appliance with sodium bicarbonatedissolved in lukewarm water. After drying replace all the accessories.