Nordson BM 200 Manual
Also see for BM 200: Operator card
                                                                | |
Contents
| 
Troubleshooting6‐2P/N 397189E 2006 Nordson CorporationBM200_EASY_GEARTroubleshooting with Control SystemThe control system offers the following troubleshooting aids, described in themanual Control System: Indication lamps and light tower Diagnosis program in the temperature section Automatic fault display in the temperature section Service display Error in the motor section LEDs on the modules and boards.Indication Lamps and Light TowerWith the exception of the yellow light on the light tower, the indication lampsand the light tower indicate the same modes as the control system: Red = Collective fault. The red lamp indicates that the control system hasrecognized a fault. White = Switched ON. After switching on and during the heatup phase, atfirst only the white indication lamp is lit (normal condition). A fault has onlyoccurred when the temperature does not increase (observe temperaturedisplay) and when the green indication lamp is not lit after the heatupphase has ended (1 hour and longer). Green = Ready for operation. The green indication lamp lights when allchannels have reached their setpoint temperatures. Yellow = Lower tank level, as set by customer.RedGreenWhite1718191 2 3 54 6 71 1 2 2 3M1 min-11barpsi2 3 54 768 109 11 12CF3 44 218 9 10 11 12Fig. 6‐1 (Refer to manual Control System for position numbers) |
Related manuals for Nordson BM 200
Nordson Rhino SD2 Manual
Nordson DuraBlue D4L Manual
Nordson iTrax Quick Start Manual
Nordson Optimeter Quick Start Manual
Nordson OptiMix Customer Product Manual
Nordson Seal Sentry 10 Series Customer Product Manual
Nordson DAGE XD7600NT Operating Instructions Manual
Nordson ARAG orion2 VISUAL FLOW Installation, Use And Maintenance Manual
Nordson 108 627B Instruction Sheet
Nordson Pro-Meter A2K D2K H2K Operator Card
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine