Operation 4-1E 2002 Nordson CorporationAll rights reserved ColorMaxIssued 12/02P/N 768625CSection 4OperationWARNING: Allow only qualified personnel to perform thefollowing tasks. Observe and follow the safety instructions inthis document and all other related documentation.Procedure for cleaning booth and application equipment with PowderFeed Centre (when present).The majority of system are sold complete with a Powder Feed Centre. Ifa Feed Centre is not present, please ignore the steps where it ismentioned.In order to successfully colour change the booth and application systemfollow the procedure outlined below.1. Put a box of powder into the Powder Feed Centre or hopper.2. Start booth.3. Put Powder Feed Centre into run mode (where applicable)4. Ensure the dip legs enter the powder and do not catch on the bag(where applicable).5. Put the transfer hoses into the waste holsters at the back of thePowder Feed Centre (where applicable).6. Start the Gun Movers (where applicable).7. Turn on the recycle.8. Start spraying powder and run production.9. After approx. 2 minutes of recycled powder being returned backthrough the recycle hose move the hose into the sieve holster. (ifapplicable).1. Daily OperationStart Up Procedure