Parts8-20Part 237478_03 2012 Nordson CorporationAccessories, Kits, and Recommended Spare KitsTables 8‐3 through 8‐4 list commonly used accessories, kits, and spare partsfor the FP‐200 gun.Table 8‐3 FP‐200 Gun Accessories and KitsPart Description Notes303 028 Conversion Kit,Extrusion to Swirl,FP‐200 GunThis kit may be used to convert an FP‐200 extrusion gun (P/N 234 896) toan FP‐200 swirl gun (P/N 234 897). Itcannot be used to convert anair‐control‐kit FP‐200 extrusion gun (P/Ns 176 122 and 157 253) to a currentFP‐200 extrusion gun (P/N 234 896). Order the heat shield separately.303 029 Conversion Kit, Swirl toExtrusion, FP‐200 GunThis kit may be used to convert an FP‐200 swirl gun (P/N 234 897) to anFP‐200 extrusion gun (P/N 234 896). Itcannot be used to convert anair‐control‐kit FP‐200 swirl gun (P/Ns 173 209 and 153 609) to a currentFP‐200 swirl gun (P/N 234 897). Order the heat shield separately.234 970 Heat Shield, FP‐200Extrusion GunOrder with conversion kitP/N 303029 (swirl to extrusion).It is not necessary to order a heatshield unless you are ordering aconversion kit. Nordson FP‐200guns (P/Ns234896 and 234 897)come with a heat shield. The heatshield is required for the gun to meetCE approval standards.234 965 Heat Shield, FP‐200Swirl GunOrder with conversion kitP/N 303028 (extrusion to swirl).Table 8‐4 Other AccessoriesPart Description Note901 915 Nozzle Cleaning Kit900 298 Heat‐conductive Paste132 426 Hose/gun diagnostic device with cable assembly