Safety1-2 2000 Nordson CorporationAll rights reservedIssued 7/00S1EN–03–[SF–Powder]–6To prevent injury follow these instructions. Do not operate or service equipment unless you are qualified. Do not operate equipment unless safety guards, doors, or covers areintact and automatic interlocks are operating properly. Do not bypassor disarm any safety devices. Keep clear of moving equipment. Before adjusting or servicing anymoving equipment, shut off the power supply and wait until theequipment comes to a complete stop. Lock out power and secure theequipment to prevent unexpected movement. Relieve (bleed off) hydraulic and pneumatic pressure before adjustingor servicing pressurized systems or components. Disconnect, lockout, and tag switches before servicing electrical equipment. Obtain and read Material Safety Data Sheets (MSDS) for all materialsused. Follow the manufacturer’s instructions for safe handling anduse of materials, and use recommended personal protection devices. To prevent injury, be aware of less-obvious dangers in the workplacethat often cannot be completely eliminated, such as hot surfaces,sharp edges, energized electrical circuits, and moving parts thatcannot be enclosed or otherwise guarded for practical reasons.To avoid a fire or explosion, follow these instructions. Do not smoke, weld, grind, or use open flames where flammablematerials are being used or stored. Provide adequate ventilation to prevent dangerous concentrations ofvolatile materials or vapors. Refer to local codes or your materialMSDS for guidance. Do not disconnect live electrical circuits while working with flammablematerials. Shut off power at a disconnect switch first to preventsparking.5. Personal Safety6. Fire Safety