Parts 7-1 2001 Nordson CorporationAll rights reserved 334 627BIssued 3/01Manual 31-46Section 7PartsTo order parts, call the Nordson Customer Service Center or your localNordson representative. Use the parts list, and the accompanyingillustration, to describe and locate parts correctly.Numbers in the Item column correspond to numbers that identify parts inillustrations following each parts list. The code NS (not shown) indicatesthat a listed part is not illustrated. A dash (—) is used when the partnumber applies to all parts in the illustration.The number in the Part column is the Nordson Corporation part number.A series of dashes in this column (- - - - - -) means the part cannot beordered separately.The Description column gives the part name, as well as its dimensionsand other characteristics when appropriate. Indentions show therelationships between assemblies, subassemblies, and parts.Item Part Description Quantity Note— 000 0000 Assembly 11 000 000 Subassembly 2 A2 000 000 Part 1 If you order the assembly, items 1 and 2 will be included. If you order item 1, item 2 will be included. If you order item 2, you will receive item 2 only.The number in the Quantity column is the quantity required per unit,assembly, or subassembly. The code AR (As Required) is used if thepart number is a bulk item ordered in quantities or if the quantity perassembly depends on the product version or model.Letters in the Note column refer to notes at the end of each parts list.Notes contain important information about usage and ordering. Specialattention should be given to notes.1. IntroductionUsing the Illustrated PartsList