Noritz N-069M-DV Owner's Manual And Installation Manual

Also see for N-069M-DV: Owner's guide and installation manual

Contents

373. Quick Connect Multi System Installation• The Quick Connect Multi System allows the installation of two units together utilizing only the QuickConnect Cord.Typical PlumbingThe Quick Connect Cord is 6 ft. long. Install the two units 18.5"-37.4" apart at the center toensure the cord will be able to reach between the units. (See Typical Plumbing diagram).(If the distance between the two units is too great, not only will the cord not be able to reach,but the water temperature may also become unstable because of the difference in pipe lengthbetween the two units.)* When connecting 2 devices, use only asingle remote controller.Note: Connect the remotecontroller to only oneof the devices.System Diagram• Insulate the hot water piping to prevent heat loss. Insulate and apply heating materials to the coldwater supply piping to prevent heat loss and freezing of pipes when exposed to excessively coldtemperatures.GQuick ConnectCordRemote Controller Cord Gas Supply PipingCold Water SupplyHot WaterRemote ControllerTerminal BlockCordConnectorCordConnectorLeave enough clearance around the plumbingto apply insulation. It will be necessary to addbends to the piping to ensure that thisclearance is available.Size the piping to allow for the maximumflow rates of the units.UnionDistance at center: 18.5-37.4".Quick ConnectCordPressureReliefValve UnionGas ValveUnionShutoffValve Shutoff ValveHot WaterShutoffValveCold WaterDistance on sides0.19-19".Make this distance as short as possible.* The hot water temperature willbecome unstable as the pipelength increases.