Noritz NRC98-OD Installation Manual

Also see for ecoTough NRC83-OD: Installation manual Owner's guide Field manual

Contents

4Check the Gas• Check that the rating plate indicates thecorrect type of gas.• Check that the gas supply line is sized for180,000 Btuh for NRC98-OD, 157,000 Btuhfor NRC83-OD.Check the Power• The power supply required is 120VAC, at 60Hz.May result in fire or electric shock.Use Extreme Caution if Using With a Solar Pre-Heater• Using this unit with a solar pre-heater can lead to unpredictable output temperatures andpossibly scalding. If absolutely necessary, use mixing valves to ensure output temperatures donot get to scalding levels. Do not use a solar pre-heater with the quick-connect multi-system.4. Before InstallationDo Not Use Equipment for Purposes Other Than Those Specified• Do not use for other than increasing the temperature of the water supply, as unexpected accidentsmay occur as a result.Check Water Supply Quality• If the water supply is in excess of 12 grains per gallon (200 mg/L) of hardness, acidic or otherwiseimpure, treat the water with approved methods in order to ensure full warranty coverage.WARNINGCAUTION5. Choosing Installation Site* Locate the appliance in an area where leakage from the unit or connections will not result in damageto the area adjacent to the appliance or to the lower floors of the structure. When such locations can-not be avoided, it is recommended that a suitable drain pan, adequately drained, be installed underthe appliance. The pan must not restrict combustion air flow.DANGERIndoor• This water heater is for outdoor installation only.Never install it indoors.Do not enclose the termination with corrugatedmetal or other materials.This will cause carbon monoxidepoisoning and a potential firehazard.