Noritz NRCP111-DV Owner's Manual

Also see for NRCP111-DV: Installation manual

21How to use Control Panel - User ModeChapter 2. – Unit Operation[TIP for the ‘Recirculation Timer’]- Press the ‘Dial Button’ (less than 1 second) : Selecting a start time and an end time- Turn the ‘Dial Button’ : Selecting a number of times- Press and hold the ‘Dial Button’ (more than 2 seconds) : Save new timer settingIf you want to delete the selected time zone, move to the time zone you want to delete and press the ‘Dial Button’.ex) Setting time : am 1:00 ~ 2:30 , AM 11:00~PM 2:30 (default time : AM 5:00~8:00, PM 5:00~11:00)PressDial Button Dial ButtonTurn clockwise5. Press the ‘Dial Button’ after locating thedesired start time. (AM 1:00 ~)6. When you press the ‘Dial Button’, theclock time increases by 30 minutes.Turn the ‘Dial Button’ to ending time.(~ AM 2:30)Dial ButtonDial ButtonDial ButtonDial ButtonDial ButtonDial ButtonPressTurn clockwiseTurn clockwiseHold for 2 secPressPressPress11. If you no longer need to set the time, pressand hold the ‘Dial Button’ for approximately2 seconds to store.13. Saved program from step 11 will flash onscreen. If correct, press the ‘Dial Button’ tocomplete programming.12. If all of settings are stored, ‘Act’ willbe flashing. Press the ‘Dial Button’.14. Programming done.8. Press the ‘Dial Button’ after locating thedesired start time.(AM 11:00 ~)9. When you press the ‘Dial Button’, theclock time increases by 30 minutes.Turn the ‘Dial Button’ to ending time.(~ PM 2:00)7. Press the ‘Dial Button’ afterlocating the ‘Dial Button’ by desired time.(AM 1:00 ~ 2:30)10. Press the ‘Dial Button’ afterlocating the ‘Dial Button’ by desired time.(AM 11:00 ~ PM 2:00)AUTODESK � � � � � � � � � �AUTODESK � � � � � � � � � �AUTODESK � � � � � � � � � �