Nortek Linear LV-D2-2MIV-3.6F User Manual
                                    | |
Contents
| 
35 36Configuration6.9 Local RecordLocal Record contains the following sub-menus:• Record Policy• Record Directory6.9.1 Record DirectoryRecord Directory allows you to configure the microSD/SD memory card,NAS, and FTP storage locations. It also allows you format the microSD/SDcard.IMPORTANT: You must format the microSD/SD card using the camerabefore you can record to it.To format the microSD/SD card to enable recording:NOTE: Formatting the microSD/SD card erases all data on the ca rd .1. Click Local Record>Record Directory.2. Make sure to disable all recording types in Record Policy befo reformatting the microSD/SD ca rd. See “6.9.2 Record Policy” on page 41.3. Under Disk Name, select SD1.Configuration3. Click Schedule to configure a motion detection schedule. The ScheduleTime Setting menu opens.NOTE: If the Schedule Time Setting does not open, disable any popupblockers.4. Configure the weekly schedule. The schedule is divided into 3 periods,and motion detection will be enabled in all times during all 3 periods.5. Click Motion Area, and configure up to 8 motion detection areas:• Select Area Motion or Area Mask to configure motion detection areas.• Area Motion allows you to select areas where motion detection is enabled.• Area Mask enables the entire image for motion detection, and allows youto select areas to disable motion detection.• Right-click to delete the last created area.6. Under Sensitivity, select the sensitivity for motion detection: Low,Medium, or High.7. Click OK to save your settings. |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine