Nortek Linear LV-D2-2MIV-3.6F User Manual
                                    | |
Contents
| 
5 63. Mount the camera to thesurface using the includedmounting screws (2x).TIP: The NET LED in the middleflashes when the camera isconnected to the network.3MountingScrewsNET LED4. (Optional) Insert theincluded BNC test cable into 4the video test cableterminals and connect to atest monitor to check thecamera viewing angle.5. (Optional) Insert a microSDcard into the camera. To 5enable recording, you mustformat the microSD card andconfigure microSDrecording. For details, see“6.9.1 Record Directory” onpage 36.NOTE: The camera supportsmicroSD cards up to amaximum size of 64GB.SanDisk™ or Kingston™ brandmicroSD cards arerecommended.BNC Test CablemicroSD cardConnection3. CAMERA INSTALLATIONMake sure to follow the correct polarity if connectingthe camera to DC power. Polarity is marked on thepower connector.1. Use the included allen key t oremove the camera cover 1screws (2x). Lift the cov eraway from the ca mer a.2. Use the included mountingtemplate or the camera to 2mark holes for the mountingscrews.Mounting Screw HoleMounting Screw Hole |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine