520 Appendix G Bluetooth wireless technologyTFTP configurationUse Procedure 129 "Enabling Bluetooth wireless technology on the IPPhone 1140E" (page 520) to enable Bluetooth wireless technology on theIP Phone. The IP Phone 1140E is used as an example.Procedure 129Enabling Bluetooth wireless technology on the IP Phone 1140EStep ActionATTENTIONIf the TFTP server is configured and running, skip to step 5 to configure the IPPhone 1140E with the TFTP Server IP address.1 Add the [DEVICE_CONFIG] section to the 1140e.cfg file.2 Create the device configuration file. This file must have thesame name as that specified for the FILENAME parameter in the[DEVICE_CONFIG] section of the 1140e.cfg file. See Figure 74"Sample of the 1140eDEV.cfg file" (page 520).Figure 74Sample of the 1140eDEV.cfg file3 The device configuration file (1140eDEV.cfg) enables Bluetoothwireless technology if ENABLE_BT 1 is present. If ENABLE_BT 0is present, Bluetooth wireless technology is disabled. Figure 75"Sample of the 1140E.cfg file" (page 521) shows an example of the1140e.cfg file with the FW and the ENABLE_BT line.It is also possible to use the 1140e.cfg file with only the[DEVICE_CONFIG] section for the control of Bluetooth wirelesstechnology. Figure 76 "Sample of the DEVICE_CONFIG file withonly the [DEVICE_CONFIG] section" (page 521) shows an exampleof the 1140e.cfg file with only the [DEVICE_CONFIG] section.If only the [DEVICE_CONFIG] version is used, you must add the[FW] section before the BootC FW recovery is used. Otherwise, theBootC FW download fails and the IP Phone reverts to the BootCTPS download screen.Nortel Communication Server 1000IP Phones FundamentalsNN43001-368 01.02 StandardRelease 5.0 20 June 2007Copyright © 2003–2007, Nortel Networks.
