50 Using the Audio menu2 If you have permission, and want to edit you audio profile, pressOk or press the send key.A list of available profiles appears.3 Select the profile you want.A check mark appears beside the selection.4 Press Ok or press the send key, to save the setting.The new profile is saved and you return to the main menu.—End—Viewing and editing the default volumesFollow this procedure to change the default volume of the handset, headset,handsfree speaker, ringer, or buzzer.Step Action1 From the main menu, select Audio.2 From the Audio Menu, use the up/down cursor keys to select DefaultVolumes and press Ok.3 You are now presented with a list of audio devices whose defaultvolumes may be adjusted. Use the up/down cursor keys to find thedevice you wish to adjust and press Ok.4 If you selected Handset or Handsfree, another menu opens. Theselected audio device is listed on the screen and the current defaultvolume setting is depicted in a bargraph display on the screen.5 Press the up cursor key to increase the default volume level of theselected audio device; press the down cursor key to decrease thedefault volume level of the selected audio device. Press OK and thesettings will be saved. Press cancel to exit this menu without savingany changes made to the default volume level for the selected audiodevice. Pressing reset will set the volume level to the nominal levelof 0dB and save this new setting.6 If you selected Ringer or Buzzer, another menu opens. The selectedaudio device is listed on the screen and the current default volumesetting is depicted in a bargraph display on the screen.7 Press the up cursor key to increase the default volume level of theselected audio device; press the down cursor key to decrease thedefault volume level of the selected audio device. Press cancel to exitCarrier VoIPNortel IP Phone 1120E User Guide (CICM)NN10300-022 02.01 Standard(I)SN10 15 June 2007Copyright © 2007, Nortel Networks.