Connecting the components32install the phone on the mounting screws, and then tighten the topscrews.Figure 7: Rotate the phone into the wall mount position.Method B: Attach the 15-cm (6-inch) CAT5e cable, position the standover the mounting rivets, and slide the phone down the wall so thatthe rivets fit into the slots on the stand, indicated in Figure 6 onpage 31 (Method B).9. Replace the stand cover. Ensure that all cables are neatly routed andpress the stand cover into place until you hear a click10. Put the phone in the wall-mount position (optional). If you wall-mounted your phone, put it in the wall-mount position by holding theTilt Lever and pressing the phone towards the base until the phone isparallel with the base. Release the Tilt Lever and continue to push thephone towards the base until you hear an audible click. Ensure thephone is securely locked in position.Wall-mount leverTilt lever
