Nortel 1140E User Manual
Also see for 1140E: User guideInstallation and operationQuick reference guideUser guideUser guide
                             | |
Contents
|
Chapter 3 Configuring options 17IP Phone 1140E User Guide3 Press the Enter key to activate Bluetooth wireless technology.A check mark is displayed to indicate that the feature is activated. The message “BT Enabled”appears at the bottom of the display.4 Put your wireless headset in its pairing or search mode. The procedure for doing this can bedifferent for each wireless headset. Refer to the documentation that accompanied your headset,or contact the vendor.For example, if you are using the GN Netcom GN 6210, do the following:a Turn the headset off by pressing and holding the telephone button for 3 - 4 seconds until ahigh to low tone is heard. The headset blue LED turns off.b Press and hold the telephone button for about 8 seconds until the blue LED flashes andthen lights steadily.5 Search for (pair) the headset:a Press the Right navigation key twice to highlight the Search button, displayed next to theSearch Devices item.b Press the Enter key.The message “Searching....” is displayed.c If the search is successful, a list of Bluetooth wireless devices appears in the Found:combo box.d Choose one of the following:— If the search is successful, proceed to step 6.— If the search is not successful, the message "Search completed. No device found" isdisplayed. Power off the wireless headset, and repeat steps 4 and 5.6 When your headset is displayed in the Found: combo box, press the Stop soft key or wait forthe search to finish.7 Choose one of the following:• If your headset is displayed in the Found: combo box, proceed to step 8.• If your headset is not displayed in the Found: combo box, select your headset from the list, asfollows:a Press the Right navigation key to navigate to the Found: combo box. Press the Enter keyto start the edit mode.b Press the Down navigation key to open the list. Press the Up/Down navigation keys toscroll and highlight your headset.c Press the Enter key to select the headset and close the list. Press the Enter key to exit editmode. |
Related manuals for Nortel 1140E
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine