Nortel 1140E User Manual
Also see for 1140E: User guideInstallation and operationQuick reference guideUser guideUser guide
                             | |
Contents
|
18 Chapter 3 Configuring optionsNN40050-105NN40050-1058 Press the Right navigation key to scroll in the list and highlight the Pair button (next to the PairDevice item) and press the Enter key.a A dialog box appears that prompts you to "Enter PIN#".b Use the telephone dialpad to enter the headset PIN and press the Enter key.9 Choose one of the following:• If the headset is successfully paired with your phone, proceed to step 10. To verify that thepairing was successful, ensure that the headset appears in the list next to the Paired: item. Ifpairing is successful, the message "Pair completed" is also displayed at the bottom of thescreen.• If the headset is not successfully paired with your phone, an error message is displayed at thebottom of the screen. If you get an error message:— Confirm that the wireless headset is still in search/pair mode. For example, on the GNNetcom GN 6210 headset the blue LED should still be lighted when the pairingoperation starts.— If the headset timed out and exited search/pairing mode, put the headset in pairingmode, as discussed in step 4, and repeat step 8.— Check that you are using the correct PIN and repeat step 8.10 Choose one of the following:• If your headset is displayed in the Paired: combo box, proceed to step 11.• If more than one device is paired, you may need to navigate to the one you want, as follows:a Press the Right navigation key to scroll in the list and highlight the Paired: combo box.Press the Enter key to start the edit mode.b Press the Up/Down navigation keys to open the list. Press the Up/Down navigations keyto scroll in the list and highlight your headset.c Press the Enter key to select the headset and close the list.Press the Enter key to exit edit mode.11 Choose one of the following:• If only one headset is paired, proceed to step 12.• If more than one Bluetooth wireless headset is paired, the first headset paired is automaticallymade the active device. To make a different headset active, do the following:— Press the Right navigation key to scroll in the list and highlight the Set button (next tothe Set Active Device item).— Press the Enter soft key.The message "Set active: “device name”" is displayed. This means that the headsetnamed is now the active wireless headset and is used when you press the headset key.Note: Check your headset's documentation to find its PIN (sometimescalled a passkey). Typically this value is 0000. |
Related manuals for Nortel 1140E
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine