Video calls43To predial, dial the number before you lift the handset.1. On the dialpad, enter the number to call.2. Press Video start.The IP Phone 1535 places the call.Receiving a video callOn receiving an incoming call, the IP Phone 1535 issues a ring tone anddisplays the message “Incoming video call from <Username/Number,DISPLAY INFO, or contact name from Phonebook>”.After you receive this message, you can either• accept the call as a video call• accept the call as an audio-only callTo accept the call as a video call, press Video start.To answer the call as audio only, perform the following steps.1. Lift the handset; or, for a handsfree call, press Send.The audio conversation begins. You do not receive remote video untilthe calling party presses Video start.2. When you are ready to start sending video, press Videostart.Attention: If the 1535 IP Phone cannot immediately determine thecall type it displays the call type as video by default. This can occurwhen you select a melody as your ring back tone. In this case yourdisplay does not include the calling party name or number and the calltype is video.On an active video callDuring an active video call, press the OPTIONS soft key to access thefollowing video-handling options:• Details
