Nortel 2220 Using Manual
Also see for 2220: Product support bulletinProduct manual
                                                                | |
Contents
|
Chapter 2 System Configuration 37Using the Nortel Networks Wireless LAN Access Point 2220[Final Draft—Nortel Confidential]Remote - Select FTP or TFTP, and enter firmware file name, the host IP address,user name, and password. Click “Start Upgrade” to start the upgrade process.For latest firmware version information, visit Nortel’s Web site at:www.nortelnetworks.com and click Software Downloads under the Supportheading.Restore Factory SettingsClick the “Restore” button to load the factory default configuration and reboot thisdevice. Note that all user configured information will be lost. You will also have tore-enter the default user name (nortel) to regain management access to this device.Reset Access PointClicking on the “Reset” button to perform a hardware reset of the access point.System LogNew screen coming with SNTP enhancements.Note: Current configurations will not be changed. |
Related manuals for Nortel 2220
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine