Nortel 2220 Using Manual

Also see for 2220: Product support bulletin Product manual

42 Chapter 2 System Configuration214853-A[Final Draft—Nortel Confidential]WEP is implemented in this device to prevent unauthorized access to yourwireless network. The WEP setting must be the same on each client in yourwireless network.Authentication Type SetupYou may choose either “Open System” or “Shared Key.”(Default: Open System)If Shared Key is enabled, WEP should be enabled and at least one shared keyshould be defined.Data EncryptionYou may choose “Enable” to enhance your network security with WEP dataencryption(Default: Disable)If Shared Key is enabled, WEP should be enabled and at least one shared keyshould be defined.Standard Key Setup (WEP Default: 128)Default Shared Key – Choose the Shared Key that has the encryption string youprefer (Key 1~3).The access point supports “Shared Key” encryption with key lengths of thestandard 64-bit and industry standard 128-bit. The bit key can be in alphanumericcharacters, or hexadecimal numerals (0~9, A~F, e.g., D7 0A 9C 7F E5.)64-Bit Manual EntryKey 1~3 - Each Key ID contains 10 HEX digits, or 5 alphanumeric characters.