Nortel 2340 Command Line Interface Manual

Also see for 2340: Installation guide Configuration guide

Contents

Nortel 2340 Command Line Interface Manual Manual pdf 15 page image

Using the Command-Line Interface 15Nortel WLAN — Location Engine 2340 Using the Command Line InterfaceSingle-Asterisk (*) Wildcard CharacterYou can use the single-asterisk (*) wildcard character in wildcarding.Double-Asterisk (**) Wildcard CharactersThe double-asterisk (**) wildcard character matches all usernames.Using CLI HelpThe CLI provides online help. To see the full range of commands available at your access level, type the help command.For example: wle# helpTable 1: Commands availablehelp Shows available commands.quit Disconnect.logout Disconnect.exit Exit from the current mode.history Shows a list of previously runcommands.enable Turn on the privileged commands.disable Turn off privileged commands.show Show, use ‘show help’ for moreinformation.show systemshow system uptimeshow system versionshow system statusshow sensorsshow logsshow logs applianceshow logs systemshow logs system controllershow logs system agentshow interfaceshow serial-numberping Send echo packets to host.