| 
40 Configuration>> Administrative Applications# https9 (Optional) From the HTTPS access menu, designate a port forHTTPS access using the port command.>> HTTPS# port Using a port other than 4443 requires the user to designate the portwhen accessing the BBI. For example, if the device IP address is192.168.0.3 and the designated port is 465, the device is accessedfrom the browser as: https://192.168.0.3:465.10 (Optional) From the HTTPS access menu, enable BBI access usingthe ena command.>> HTTPS# ena11 (Optional) Finalize the changes using the apply command.>> HTTPS# apply—End—Applying the Nortel SNAS licenseThe Nortel SNAS ships with support for up to 200 authenticated usersessions. To support additional users on your Nortel SNAS switch, you mustobtain a Nortel SNA software license file. The software license file containsa software license key that you must enter into the Nortel SNAS switch toactivate support for the additional users. The file can support an additional100, 250, 500, 1000, 2000, or, 5000 users.The following table lists the part number for the additional concurrentendpoints.Part Number DescriptionEB1639171 Secure Network Access License - Add 100 concurrentendpointsEB1639172 Secure Network Access License - Add 250 concurrentendpointsEB1639175 Secure Network Access License - Add 500 concurrentendpointsEB1639182 Secure Network Access License - Add 1000 concurrentendpointsNortel Secure Network AccessInstallation — Quick Start Switch 4070NN47230-303 01.01 Standard2.0 28 July 2008Copyright © 2008, Nortel Networks. |
