Page 14 of 46 Install ISDN BRI hardware553-3901-200 Standard 7.00 January 2002• ISDN PRI: Installation (553-2901-201)• System Installation Procedures (553-3001-210)• ISDN Basic Rate Interface: Product Description (553-3901-100)• ISDN Basic Rate Interface: Administration (553-3901-300)Install ISDN BRI hardware for line applicationsThe following lists the procedures for installing ISDN BRI hardware for lineapplications. Meridian 1 must already be installed and operating according tothe instructions in System Installation Procedures (553-3001-210) beforeperforming these procedures.For a successful installation, perform these procedures in the order listedbelow:1 Select the card slots where the ISDN BRI cards will be located2 Remove the module cover for card installation3 Install the MISPs4 Install the SILCs and/or UILCs or BRSCs5 Connect ISDN BRI terminals. This procedure comprises the following:— connect the Meridian 1 to the Main Distribution Frame (MDF)— cross connect the MDF— connect ISDN BRI terminals to the DSL— initialize the ISDN BRI terminals.—————————— End of Procedure ——————————