Nortel 7430 Deployment Manual

Also see for 7430: User guide

6International Regulatory InformationThe CE Marking on this equipment indicatescompliance with the following:This device conforms to Directive 1999/5/EC onRadio Equipment and TelecommunicationsTerminal Equipment as adopted by the EuropeanParliament And Of The Council.This is a class A product. In a domestic environment this product may cause radiointerference in which case the user may be required to take adequate measures.Hereby, Nortel Networks declares that this equipment is in compliance with the essentialrequirements and other relevant provisions of Directive 1999/5/EC.Information is subject to change without notice. Nortel Networks reserves the right tomake changes in design or components as progress in engineering and manufacturingmay warrant. This equipment has been tested and found to comply with the EuropeanSafety requirements EN 60950 and EMC requirements EN 55022 (Class A) and EN55024. These EMC limits are designed to provide reasonable protection against harmfulinterference when the equipment is operated in a commercial and light industrialenvironment.WARNINGThis is a class A product. In a domestic environment this product may cause radiointerference in which case the user may be required to take adequate measures.The above warning is inserted for regulatory reasons. If any customer believes thatthey have an interference problem, either because their Nortel Networks productseems to cause interference or suffers from interference, they should contact theirdistributor immediately. The distributor will assist with a remedy for any problemsand, if necessary, will have full support from Nortel Networks.NN40110-304 1.1