37BCM 200/400 Release 3.7 configurationThis chapter describes configuration procedures for the BusinessCommunications Manager (BCM) 200 and 400 Release 3.7 systems.BCM 200/400 Release 3.7 configuration proceduresThe sequence of BCM 200/400 Release 3.7 configuration procedures is asfollows:• "Verifying incoming VoIP trunks provisioning" (page 37)• "Adding keycodes files" (page 38)• "Adding a functionality-specific keycode" (page 38)• "Configuring VoIP H.323 trunk media parameters" (page 39)• "Configuring VoIP SIP trunk media parameters" (page 40)• "Configuring H.323 local Gateway IP parameters" (page 41)• "Configuring SIP local Gateway IP parameters" (page 42)• "Configuring SIP subdomains" (page 43)• "Configuring remote H.323 Gateways" (page 44)• "Configuring remote SIP endpoints" (page 45)• "Configuring VoIP lines for outgoing calls" (page 46)• "Configuring target lines for incoming calls" (page 49)• "Configuring telephones to access outgoing VoIP lines" (page 50)Verifying incoming VoIP trunks provisioningPerform this procedure to verify that incoming VoIP trunks are provisioned.Step Action1 Log on to the Unified Manager.2 Select the BCM>System>Licensing heading.The Licensing Setting page appears.Enterprise: CommonSolution Integration Guide for Multisite Business Communications Manager SystemsNN49000-303 01.01 StandardRelease 4.0, 3.7 29 June 2007Copyright © 2007, Nortel Networks.