Nortel BCM200 Integration Manual

Also see for BCM50: Configuration guide Installation and maintenance guide Keycode Installation Guide Installation and configuration guide Documentation update

Contents

Nortel BCM200 Integration Manual Manual pdf 42 page image

42 BCM 200/400 Release 3.7 configurationParameter ValueCall Signaling DirectGatekeeperRoutedGatekeeperResolvedGatekeeper RoutedNoRASPrimary Gatekeeper IPBackup GatekeeperAlias NamesRegistration TTL (Seconds)Gateway Protocol NoneSL1CSEH245 Tunneling EnabledDisabledCall Signaling PortRAS PortForce G.711 for 3.1k Audio EnabledDisabledForward Redirected OLI EnabledDisabled5 When implementing your dialing plan, in the H.323 Local GatewayIP Interface tab, be sure to select a value for Fall back tocircuit-switched. This determines how the system handles calls ifthe IP network cannot be used.6 For Gateway protocol, select CSE.7 Applying the changes made to the Call Signaling Settings causesall H.323 calls to be dropped. It is recommended that you makechanges to the Call Signaling Settings during off-peak hours or ascheduled maintenance window.—End—Configuring SIP local Gateway IP parametersPerform the following procedure to configure SIP local Gateway IPparameters.Enterprise: CommonSolution Integration Guide for Multisite Business Communications Manager SystemsNN49000-303 01.01 StandardRelease 4.0, 3.7 29 June 2007Copyright © 2007, Nortel Networks.