Nortel BCM50 2.0 Installation Manual

Also see for BCM50 2.0: User guide System overview guide User guide Configuration guide User guide

Contents

Nortel BCM50 2.0 Installation Manual Manual pdf 13 page image

13Telephony Device Installation GuideChapter 2Device descriptionThis chapter describes the telephony devices (telephones) that BCM50 supports.Analog devicesBCM50 supports analog telephones (single-line telephones), cordless telephones, fax machines,answering machines, and modems (with a maximum speed of 28.8 kbit/s). You must install ananalog station media bay module (ASM8, ASM8+, and GASM) for analog devices (see Chapter 3,“Installing an analog station media bay module). To connect a standard analog voice device ordata communication device to the BCM50 system through a digital station module, you mustinstall an ATA2 (see Chapter 4, “Installing the analog terminal adapter).Digital devicesBCM50 supports the following digital devices:• T7000(International only): four memory buttons, without display or indicators• T7100: one-line display, one memory button without indicator• T7208: one-line display, eight memory buttons with indicators• T7316: two-line display, three display buttons, 16 memory buttons with indicators, eightmemory buttons without indicators.The T7316 supports separate mute key and a headset key under the dial pad.• T7316E: two-line display, three display buttons, 16 memory buttons with indicators, eightmemory buttons without indicators; handsfree, mute, and headset buttons (located under thedial pad)• T7406 cordless telephone system: six memory buttons with indicators and a two-line displaywith three display buttons.The T7406 provides cordless mobility in a small office environment. Each base stationsupports three telephones. Function is based on the 7316 telephone. The base station connectsto a digital station media bay module on the system.• Key Indicator Module (KIM): 24 memory buttons with indicators• BST Doorphone: used as an intercom to control access to your building. Press the Call buttonon the BST Doorphone to call one or more telephones, or to send a distinctive chime totelephones in an assigned page zone. Place an internal call from any telephone on the systemto the BST Doorphone to set up a two-way voice call. Install a Door Opening Controller topermit the activation of locks on doors or gates.