Nortel BCM50 2.0 Installation Manual

Also see for BCM50 2.0: User guide System overview guide User guide Configuration guide User guide

Contents

Nortel BCM50 2.0 Installation Manual Manual pdf 23 page image

23Telephony Device Installation GuideChapter 4Installing the analog terminal adapterThis chapter provides installation instructions for the analog terminal adapter 2 (ATA2) or ATA.The ATA2 connects a standard analog voice device or data communication device to the BCM50system through a digital station module. Examples of analog voice devices are analog telephonesand answering machines. Examples of analog data communication devices are modems and faxmachines.The ATA2 provides on-premise service only (protected plan wiring only).Refer to the following topics for information on installing an ATA2:• “Configuration overview” on page 23• “Installing the ATA2” on page 24• “Configuring the ATA2” on page 27Configuration overviewThe following sections describe environment configurations for connecting analog and datadevices to the main unit using an ATA2:• “Analog devices” on page 23Analog devicesFigure 3 on page 23 shows an installation overview for connecting an analog device or analog datadevice through an ATA2 to the BCM50 main unit.Figure 3 Analog device installation overview