Nortel M2000 Reference Manual

Also see for Meridian M2000 Series: Quick start guide

22 Keyboard dialing555-4001-110 Standard 09.03 July, 2002&D2 Go on–hook when the on–to–off transition of DTRoccurs. This command is the default ifASSERTDTR DPOPT is not datafilled for MADO.&D3 Go on–hook and reset to default settings (such as,MADO profile configuration)&Q0 MADO ignores S37; connection is attempted at thespeed of the last autobaud command.&Q5 MADO attempts to connect at baud rate selectedby S37.&R0 CTS, CD, and DSR track far-end RTS. Thiscommand is the default if ASSERTRTS DPOPT isnot datafilled for MADO.&R1 Assume CTS is always present. This commandasserts the EIA control leads CTS, CD, and DSR.This command is the default if ASSERTRTSDPOPT is datafilled for MADO.&S0 Assume DSR is present. This command assertsthe EIA control leads CTS, CD, and DSR. Thiscommand is the default if ASSERTRTS DPOPT isdatafilled for MADO.&S1 CTS, CD, and DSR track far-end RTS. Thiscommand is the default if ASSERTRTS DPOPT isnot datafilled for MADO.Z0 Reset MADO to default settings.Z1 Reset MADO to default settings.&F Reset MADO to default settings.&Y0 Reset MADO to default settings.&Y1 Reset MADO to default settings.Table 4 Hayes Keyboard Dialing commands (Sheet 3 of 3)Command Meaning