Nortel M7310 Quick Programming Manual

Also see for Norstar T7316E: User guide User guide User's card Installation instructions Quick reference guide

Contents

Nortel M7310 Quick Programming Manual Manual pdf 11 page image

11S E C T I O N I ITime and DateCHANGING THE TIME AND DATE SETTINGSUse this feature to change the clocks to GMT (winter) and BFT (summer) times. Clocks in spring is**forward and in fall is **back. In this example, the time is changed to 1:30 p.m. and the date is changedfrom January 1, 2001, to July 15, 2001.To adjust the time and date on the entire system, you need only adjust the clock at oneextension using the Basic password. The clock, which also controls the schedules foryour routing and ringing features, must be re-set after a power failure.ACTION VISUAL DISPLAY1. Place the programming overlay over the appropriate buttons onyour programming telephone (refer to "PROGRAMMINGOVERLAYS" on page 5).1 Jan 1:00 am2. Press ≤ followed by ••°›fl‹ (the Time and Datecode) followed by ¤¤‡›¤(the Basic password).Hour: 01NEXT CHANGE3. Press CHANGE. Hour:__CANCL4. Use the keypad to enter the two-digit hour. The display showsone or two digits. The display prompts you to choose AM or PM.AMOK CHANGE5. Press CHANGE. AMOK CHANGE6. Press OK. Hour:01NEXT CHANGE7. Press NEXT. Minutes:01NEXT CHANGE8. Press CHANGE. Minutes: __CANCL9. Using the keypad, enter the minutes. Minutes:30NEXT CHANGEPress ® to end the session if you do not want to go on to changethe date. To change the date, continue with Step 10.10. Press NEXT. Year:01NEXT CHANGE11. Press CHANGE. Year:___CANCL12. Use the keypad to enter the year. Year:01NEXT CHANGE