MCC 3100 for Windows Mobile functionality54Enabling Call Forward (WiFi only)When you enable Call Forward (CFW), all incoming WiFi calls forward tothe number your administrator specifies in the configuration settings.1. On the navigation bar, tap the Home icon.The Home screen appears.2. Tap the check box beside the CFW icon to enable CallForward.You can tap the CFW check box to switch between CFW enabled anddisabled.For information about configuring CFW, see Appendix A “Manualsetup” on page 97.If your administrator enables the Play ring reminder when forward settingyour mobile device rings briefly each time a call forwards.To test Call Forward, direct your calls to another phone number, forexample, your home number. Dial your enterprise phone number toensure the call redirects to your home number. If the call does not forwardto your home number, contact your administrator.CS 1000 operating parametersOn the MCC 3100 for Windows Mobile, CFW does not prevent the cellularinterface from extending the cellular leg of the call if CS 1000 isconfigured to present each call on both the cellular and WiFi interfaces.On the MCC 3100 for Windows Mobile for WiFi, Call Forward does notprevent any other phones with the same Directory Number (DN) fromringing. If you enable Call Forward for all phones on the DN then youmust set Call Forward on a desktop phone.IMPORTANT!Call Forward is for WiFi calls only. To enable callforward for cellular calls, configure the Global Systemfor Mobile Communications (GSM) and Code DivisionMultiple Access (CDMA) settings provided by yourwireless service provider.
