Nortel Meridian Companion Operation Manual

Also see for Meridian Meridian 1: Installation guide Implementation guide Scripting Guide Configuration manual Description

Contents

Nortel Meridian Companion Operation Manual Manual pdf 10 page image

Page 6 of 20 Programming the Meridian Companion system553-3601-320 Standard 2.00 November 19987. Reenter the new password and press OK .The display shows Password changed . If the display showsPswd not changed, you did not enter the same password again. Goback to step 4.8. Record the new password in Meridian Companion Programming andProvisioning Record.9. To continue in Administration programming, press * . To exit,press ® .Changing the Registration passwordThe Registration password, which is a combination of one to six characters, isused when registering portables on the system. The default password is‡¤‹›fl . Record the password in Meridian CompanionProgramming and Provisioning Record.1. Press ƒ••· and enter the Administration password. Thedisplay shows 1. Registration .2. Press * until the display shows 4. Passwords .3. Press ^ . The display shows Admin. password .4. Press * . The display shows Reg. password .5. Press CHANGE. The display shows New pswd: .6. Enter a new one- to six-digit Registration password. Use BKSP forcorrections.7. Press OK . The display shows Re-enter: .Note: If you do not enter any digits and press OK , the display showsPswd not changed .8. Reenter the digits and press OK . The display showsPassword changed .If the display shows Pswd not changed , you did not reenter the samepassword. Go back to step 5.9. Record the new Registration password in Meridian CompanionProgramming and Provisioning Record.