Nortel Meridian Companion PCI User Manual

Also see for Meridian Companion: Operation guide Supplementary guide Product support bulletin Reference guide Reference manual

Contents

Nortel Meridian Companion PCI User Manual Manual pdf 21 page image

16 Companion Diagnostic Software basicsCompanion Diagnostic Software for PCI User Guide P0886303 Issue 01 StandardNote: Displayed data is referenced to the time and date of thesystem. To ensure accurate referencing, use theAdministration Terminal to set the time correctly.Local access programmingEnsure that the following steps have been completed before settingup a new CDS site with local access:• System ID programmed for the RADRemote access programming using the RAD internal modemEnsure that the following steps have been completed before settingup a new CDS site with remote access using the RAD internalmodem:• the line into the wireless system dedicated to the RAD (note thetelephone number)• System ID programmed for the RAD• line type programmed as Key Service Unit (KSU) for the RAD• allowable line number programmed for the RAD (refer to RemoteAccess Device Installation Guide)• Auto Answer programmed for the RADThe Auto Answer settings programmed depend on how the RADinternal modem is used.If a line is dedicated to the RAD:• set auto answer ‘on’ for the RAD• set the number of rings before auto answer to ‘1’If a line is shared with the RAD:• set auto answer ‘on’ for the RAD• set the number of rings before auto answer to a number between‘1’ and ‘10’Note: Beware of any telephony application that may cause the callto be answered before the RAD answers automatically (e.g.,Call Forward or Voice Mail).In the case of a shared line, an alternate approach, is to set RAD AutoAnswer ‘off’ for normal wireless system operation. When you need