56 Using the Feature menuStep Action1 From the main menu, open the Feature menu.2 On the terminal, select the key that you want to assign to adifferent feature.3 From the Feature menu, select and open Assign.4 Press Ok.The Assign menu opens.--End--Defining the key typeFollow this procedure to define the key type.Each feature key can be defined in one of two ways: Central or Local.A feature key defined as Central can have a Centrex feature, such asCall Forward, assigned to it. A feature key defined as Local can have adirectory entry assigned to it. By default, all feature keys are defined asCentral.For further information about Centrex features, see Nortel CICMFundamentals, (NN10044-111).Step Action1 From the main menu, open the Feature menu.A list of the feature keys and their current assignments appears.2 Select a key to change.The Feature submenu appears.3 Select and open Assign.If the key you selected in step 2 is assigned to a Centrex feature,these soft key labels appear: Key Type and Autoscroll.If the selected key is assigned to a local feature, these soft keylabels appear: Key Type and Feature.4 Press Key Type.The Key Type screen appears. A check mark appears besidethe type currently assigned to the key.5 Perform one of these actions:• To change Central to Local, select Local.• To change Local to Central, select Central.6 Press Ok.Carrier VoIPNortel IP Phone 2007 User Guide (CICM)NN10300-020 02.03 Standard7 March 2008Copyright © 2007, 2008 Nortel Networks.
