Using the Assign menu 57The key type is changed and a check mark appears beside theselection.7 To assign a directory entry to a Local key, see “Assigning adirectory entry to a feature key” (page 57).--End--Assigning a directory entry to a feature keyFollow this procedure to assign a directory entry to a feature. Assigninga directory entry to a feature key gives you the ability to speed dial thatnumber when you press the key.PrerequisitesThe feature key you select must be defined as Local. See “Defining thekey type” (page 56).Step Action1 From the main menu, open the Feature menu.A list of the feature keys and their current assignments appears.2 Select the key defined as Local.The Assign menu appears.3 Press Feature.The directory contact list opens.4 Scroll through the list and select the entry to assign to the featurekey.5 Press Ok.A check mark appears beside that entry in the directory. Thenumber is dialed when you press the key.--End--Enabling or disabling autoscrollIf autoscroll is enabled, the IP Phone automatically directs you to thescreen for the active feature. For example, if your secondary DirectoryNumber (DN) is configured on screen two, and you receive a call to thatnumber, the feature screens scroll to page two. You can answer the callimmediately without searching for the screen.Follow this procedure to enable or disable the autoscroll feature.Carrier VoIPNortel IP Phone 2007 User Guide (CICM)NN10300-020 02.03 Standard7 March 2008Copyright © 2007, 2008 Nortel Networks.
