Chapter 2 Configuring servers 63Nortel VPN Router Security — Servers, Authentication, and CertificatesTo add a DHCP relay interface:1 Select Servers > DHCP Relay and click Add.2 Select a Physical Interface from the list.3 For the state, select either Enabled or Disabled.4 For the DHCP Server, enter the IP address and then click Enabled forHelper 1, Helper 2, and/or Helper 3.5 Click OK.To view DHCP Relay statistics:1 Select DHCP Relay.2 Click Statistics.The DHCP Relay Statistics window provides the following details:• In—total number of all of the incoming DHCP packets• Out—total number of forwarded DHCP packets• Discarded—total number of incoming packets that were ignored because ofbad content• Relayed To Server—total number of packets forwarded to a DHCP server(s)• Relayed To Client—total number of packets forwarded to DHCP client(s)Configuring SSL administrationThe SSL administration feature enables secure management of the VPN Routerover SSL-enabled HTTP (HTTPS) and is used over all tunnel and interface types.Remote management of a VPN Router requires only an SSL-enabled Webbrowser on the administrator's computer, which most operating systems include.Figure 9 is an example of SSL administration.
