49SFP specificationsThis section provides technical specifications for the supported small formfactor pluggable (SFP) models. Use this information to aid in proper networkdesign.The specifications given in this section meet or exceed those specified inthe applicable IEEE standards, where they exist.In these specifications, unless otherwise noted, receiver sensitivity isdefined as the minimum average input optical power for which the receiveris guaranteed to meet the bit error rate (BER) of 10-12.Navigation• "SFP labels" (page 50)• "General SFP specifications" (page 50)• "1000BASE-T SFP specifications" (page 51)• "1000BASE-SX (LC) SFP specifications" (page 51)• "1000BASE-SX (MT-RJ) SFP specifications" (page 52)• "1000BASE-LX SFP specifications" (page 52)• "1000BASE-XD CWDM SFP specifications" (page 53)• "1000BASE-ZX CWDM SFP specifications" (page 54)• "1000BASE-SX DDI SFP specifications" (page 54)• "1000BASE-LX DDI SFP specifications" (page 55)• "1000BASE-XD DDI 1310 nm SFP specifications" (page 55)• "1000BASE-XD DDI 1550 nm SFP specifications" (page 56)• "1000BASE-ZX DDI SFP specifications" (page 57)• "1000BASE-XD DDI CWDM SFP specifications" (page 57)• "1000BASE-ZX DDI CWDM SFP specifications" (page 58)• "1000BASE-BX DDI SFP specifications" (page 59)Nortel Ethernet Routing Switch 8600Installation — SFP, XFP, GBIC, and OADM Hardware ComponentsNN46205-305 01.02 Standard4.1 16 November 2007Copyright © 2007, Nortel Networks.
