44 Chapter 3 Using SREMField DescriptionThe default value is public.Note: This field is not editable in this release.4 Click Create.SREM will attempt to connect to the network access device. One oftwo results follows:• If SREM connects to the network access device successfully, thenetwork access device appears in the Device List.• If SREM cannot connect to the specified device, check the IPand login information, and click Try Again.—End—Deleting a network access deviceUse the following procedure to add a new network access device throughSREM.Step Action1 Open SREM.2 Select the network access device you want to delete in the DeviceList.3 Select Edit > Delete.The network access device disappears from the Device List.—End—Grouping network access devices in SREMUse the following procedure to organize the SREM device list by creatingSub Networks of network access devices.Nortel Secure Network Access Switch Software Release 1.6.1Installing and Using Security and Routing Element Manager (SREM)NN47230-301 02.01 Standard1.6.1 16 July 2007Copyright © 2007, Nortel Networks.
