Nortel SREM User Manual

Contents

Nortel SREM User Manual Manual pdf 51 page image

Managing changes within the SREM 51Step Action1 Click Apply on the toolbar to send changes to the device.Changes to the active SREM screen are sent to and stored on thedevice, but are not yet made permanent.2 Click Commit on the toolbar to make all applied changes permanenton the device.Changes are now permanent and take full effect. In some cases, youmay need press Rediscover to view updated information in SREM.—End—Applying and saving groups of changesTo apply and save many changes in the SREM at one time, update thevalues for fields on multiple screens or devices before accessing theChange Manager to view and apply the changes.Note: If the Show Uncommited Changes option is enabled, a dialogbox will appear each time you attempt to leave a screen with unappliedchanges. For more information, see "Configuring SREM settings" (page40) "Configuring SREM settings" (page 40).Use the following procedure to open and access the Change Manager:Step Action1 Open SREM.2 Change network access device settings as necessary.When unapplied changes exist in the SREM, the Change Managericon appears in color. See "Screen icons" (page 34) "Screen icons"(page 34) for more information about the Change Manager icon.3 Click the Change Manager icon in the bottom-right corner of theSREM window to open the Change Manager tab (Figure 27 "ChangeManager tab" (page 52)).Nortel Secure Network Access Switch Software Release 1.6.1Installing and Using Security and Routing Element Manager (SREM)NN47230-301 02.01 Standard1.6.1 16 July 2007Copyright © 2007, Nortel Networks.