Nortel T7406 Installation Manual

Also see for T7406 Phone: Installation guide User's card Manual

Contents

Chapter 1 About your T7406 Phone 21T7406 Cordless Handset Installation GuideRing SelectionYou can accept or block calls from ringing at your handset using the Allow calls feature. Whenyou receive a call and the Allow calls feature is OFF, line buttons and the light collar flash but thecall does not ring.To assign the ring selection:1 Press the Options button.2 Press SHOW.3 Press NEXT three times.The display shows 4. Ring Selection.4 Press SHOW.The display shows Allow Calls.5 Press OFF to prevent calls from ringing at the handset.Do not disturb appears on the displays when the Allow calls feature is OFF.Note: Press ON to allow calls to ring at the handset.6 Press the Options button.The display changes to show the date and time.Setting Handset FeaturesAfter you identify the handsets to the base station, you can set up the handset features:Ring TypeTo assign the ring type:1 Press the Options button.2 Press SHOW.The display shows 1. Ring Type.3 Press SHOW. The display shows Ring Type :1.4 There is also a Ringer Off setting.5 Press CHANGE to listen to the four different rings available on your handset.6 Press OK to accept the ring type of your choice.7 Press the Options button to exit the Option menu.The display changes to show the date and time.Note: Ring Type can only be set through the Option menu on the handset. Thisfeature cannot be set in system programming.