Nortel i2050 Installation Manual

Also see for i2050: Description User guide

Contents

Chapter 2 Installing the i2050 Software Phone 15i2050 Software Phone Installation GuideInstalling the USB Audio Headset1 Connect the coiled lower cord to the headset cord with the Quick Disconnect connector.Ensure the Quick Disconnect is securely fastened.2 Connect the headset cord to the RJ9 jack on the adaptor.3 Connect the USB cable to the headset adaptor and to one of the USB jacks on the back of yourPC or USB hub.4 The first time the headset adapter is plugged in, there will be a delay while the Windowsoperating system configures the device and locates appropriate driver software. During theinstallation you may be prompted to supply the original Windows CD ROM so that theWindows operating system can locate drivers.5 After you have installed the USB headset adapter, you must use the i2050 Software PhoneConfiguration Utility to select ‘USB Audio Device’.USB FAQ• My computer doesn't have USB, can I use an add-on USB card?The computer must have a USB connector. The USB Headset has not been tested on USB addon or upgrade cards. Performance or operation is not guaranteed of these cards.• I don't have enough USB ports available, can I use a USB hub?The USB Headset has been tested successfully behind a variety of USB hubs. It is not practicalto test on all of them but no issues have been uncovered on the ones that have been tested. Forbest results, use a powered hubs.Optional In-Use Indicator (not provided with kit)A 2.5mm output jack is provided next to the USB connector for activation of a visual in-useindicator such as the 1127P Desktop Visual Alerter from Algo Communication Products Ltd.(604) 454-3790 / sales@algosolutions.com or equivalent.